discus fry tank water flow rate
-
rustier - Posts: 19
- Joined: Sat Aug 03, 2024 8:33 pm
discus fry tank water flow rate
What's the ideal water flow rate for a discus fry tank? I've got a 20-gallon with sponge filters, but the fry seem stressed when the flow's too high. Water params are good, 0 ammonia, 0 nitrite, 5 nitrate. Temp's at 84F, and I'm doing 50% water changes daily. Fry are about 2 weeks old, eating baby brine shrimp. Tankmates are just a few cherry shrimp. Should I dial back the flow or let them adjust?
-
Raptor - Posts: 13
- Joined: Sun Jan 07, 2024 4:09 am
Re: discus fry tank water flow rate
I'd cut the flow way down. Fry don't handle strong currents well, and sponge filters can be tweaked by squeezing them to reduce output. My 20-gallon fry tank runs at half the usual flow, and they're way more active. Also, cherry shrimp might mess with the fry's food, so keep an eye on that. What's your sponge filter model?
-
silverbob - Posts: 21
- Joined: Sun Jul 16, 2023 12:55 am
Re: discus fry tank water flow rate
Agree with Raptor. Slow flow is key for fry. I use a dual-sponge setup with adjustable air pumps, set to the lowest bubble rate. Fry need calm water to feed properly. At 2 weeks, they're still fragile. Are you using any plants? Floating plants like frogbit can help buffer the flow and give them hiding spots.
-
Purrer - Posts: 20
- Joined: Mon Oct 14, 2024 11:08 pm
Re: discus fry tank water flow rate
Yo, crank that flow down, dude. Fry ain't built for rapids. My lil' guys chilled way more when I dialed it back. Also, ditch the shrimp if they're stealing food. Fry need all the eats they can get.
-
Finny - Posts: 64
- Joined: Wed Mar 30, 2022 9:41 pm
Re: discus fry tank water flow rate
Yep, squeezing the sponge works great. I've got a 20-gallon with a Hydro sponge, and reducing the air pump flow made a huge difference. Fry are way less skittish now. How often are you feeding the baby brine shrimp?Raptor wrote: ↑Fri Aug 29, 2025 11:28 am I'd cut the flow way down. Fry don't handle strong currents well, and sponge filters can be tweaked by squeezing them to reduce output. My 20-gallon fry tank runs at half the usual flow, and they're way more active. Also, cherry shrimp might mess with the fry's food, so keep an eye on that. What's your sponge filter model?
-
Jumper - Posts: 83
- Joined: Thu Jan 27, 2022 1:53 am
Re: discus fry tank water flow rate
I've had similar issues. Lower flow definitely helps. My fry tank has a sponge filter and a very gentle air stone. Fry are growing faster now that they're not fighting the current. What's your water change routine like? Daily changes might be stressing them too.
-
Lodgemaker - Posts: 12
- Joined: Sun Jul 17, 2022 5:42 am
Re: discus fry tank water flow rate
Bro, just slap a valve on that air line and call it a day. Fry don't need no whitewater ride. Keep it chill, and they'll thrive. Also, what's your substrate? Bare bottom's easier for fry tanks.
-
Paisa - Posts: 12
- Joined: Thu Oct 10, 2024 3:34 pm
Re: discus fry tank water flow rate
Exactly this. I've raised multiple batches of fry, and low flow is non-negotiable. Also, consider adding Indian almond leaves for tannins—they've got anti-stress benefits. What's your tank's pH? Fry do better in slightly acidic water.silverbob wrote: ↑Fri Aug 29, 2025 12:43 pm Agree with Raptor. Slow flow is key for fry. I use a dual-sponge setup with adjustable air pumps, set to the lowest bubble rate. Fry need calm water to feed properly. At 2 weeks, they're still fragile. Are you using any plants? Floating plants like frogbit can help buffer the flow and give them hiding spots.
-
rustier - Posts: 19
- Joined: Sat Aug 03, 2024 8:33 pm
Re: discus fry tank water flow rate
Thanks for the advice, everyone. I'll try reducing the flow and maybe remove the shrimp. The sponge filter's a basic AquaTech model, and the substrate is bare bottom. pH is around 6.8. I'll look into the almond leaves too.